充气泵使用说明
Pump Instruction
（一）、特征Characteristics
1、产品体积小巧，操作简单，直接将电源插入汽车点烟器即可使用。
2、本机适用范围广泛如汽车、机车、脚踏车之轮胎，橡皮艇、充气玩具等。
3、带有照明灯，方便夜间操作。
4、随时准备一台，置于汽车行李箱，不占用空间，妙用无穷。
1. The product is small in size and easy to operate. It works as long as you insert the power plug into vehicle’s cigarette lighter directly.
2. The pump can be used in variously fields, such as tire of cars, motorbikes, and bicycles, rugby boats and inflatable toys.
3. An attached light makes the operation easy in dark.
4. Take one with you! It doesn’t take up much space if you put it in your boot. You will find it useful in various ways.
（二）、使用方法（请按数字顺序操作使用）
Direction (please follow the direction in numerical order)
1、将点烟头插入DC12V点烟器插座。
2、将橡胶管尾端的气嘴接入轮胎之螺牙气门。
3、启动电源开关，即可开始充气。
4、充气时，仪表指针开始随着气压上升，当指针达到汽车适当胎压时（一般小型汽车胎压为28~35PS），关掉本机开头，取出插头及气嘴。
1. Insert the cigarette lighter into DC12V cigarette lighter socket.
2. Connect the valve at the end of the rubber hose with tire threads valve.
3. Turn on the power and it will begin to inflate.
4. When inflating, the indicator in dashboard will go up with pressure. Keep the pump on until the indicator point to the mark of appropriate tire pressure (the tire pressure for smaller vehicles is normally from 28PS to 35PS.), and then pull out the plug and the valve.
（三）、注意事项Notice
1、本机公限使用直流DC12V、15A之电源，不可使用110V家庭用电，如欲使用家庭用电，必需加电源适配器。
2、一般汽车胎充气，约在3分钟即达30PDI（2.2~2.5KG）之正常胎压,如开始充气时,仪表之指针快速上升(到达100PDI).即表示空气受到阻塞,空气没有进入轮胎,此时需立即拔下气咀,重新操用,否则仪表及马达会受到损害.
3、汽车点烟器不干净或保险丝损毁，均会不导电，亦会使本机不能运转，故需确保点烟器及保险丝性能良好。
4、为确保充气泵良好工作，连续充气时间不宜过长，如连续使用20分钟，必须停机自然冷却5分钟才能使用，否则会损坏马达及零件。
5、本机不能使用于卡车和货车。
6、车用电动充气泵插在汽车里的点烟器型电源接口上的，用12V电压，方便携带，不占用很多空间，很小巧，美观；有了它你就可以随时随地给你的爱车充气了；电源线长约为3米，给后胎打气也很方便；如果您是一位有车族，就赶紧备一个吧，这跟备胎一样重要。
1. Operating voltage and load current can only be DC 12V and 15A’. Only when a power adapter is used. can operating voltage be 110V.
2. Generally it takes three minutes to reach the normal tire pressure 30 PDI (2.2~2.5KG) when inflating. If the pointer of dashboard rises rapidly (reaching 100PDI) when inflating begins, it indicates that the air is blocked and fails to get into the tire. The valve should be pulled out immediately and do over again, otherwise the dashboard and motor will be damaged.
3. When the cigarette lighter is dirty or the fuse is damaged, electricity cannot be conducted, and thus the pump cannot work. Make sure that the cigarette lighter and the fuse both work well.
4. To ensure that the pump work well, the inflation time should not last long. If it is used continually for 20 minutes, stop and wait for five minutes to let it cool down, otherwise the motor and the parts will be damaged.
5.It can not be used for a truck or a van.
6.Operating voltage should be 12V for a vehicle-use motor-driven pump which is used by being inserted into vehicle’s cigarette lighter. It is portable, compact and attractive. It is convenient to inflate the car whenever and wherever you want. It is also convenient to inflate the rear tire for the power cord is three meters long.if you have a car, having one is as important as having a spare tire.
（四）、详细使用步骤 detailed instruction
1充气最大气压可到达250PSI一般保持220PSI即可
2使用汽车点烟器电源，快速给汽车、摩托车车胎充气； 3于高速公路、野外或早晨上班，汽车轮胎突然漏气时，更能发挥其救急的功能；
4随时准备一台，置于汽车行李箱，不占用空间，妙用无穷；
5可快速给皮球、充气球等充气；
6有气压显示表，可准确测量轮胎的气压；
7外壳坚固耐用；
8彩盒包装，小巧、方便携带 使用方法：
9将橡皮胶管顶端气门嘴直接插在轮胎气门，听到轮胎泄气声时，表示空气已经流通，马上将气门嘴扳手向内90度压紧，此时空气不再泄出；
10取出插头，连接点烟器；
11打开马达，即可开始充气；
12充气时，仪表指针开始随着气压上升，大指针达到汽车适当胎压时（一般汽车胎压为193-241PSI），关掉充气机开关，取出插头及气嘴。
1. The utmost air pressure of inflation can reach 250PSI. Generally 220PSI is enough.2. It can use the power supply of a vehicle cigarette lighter to inflate the tire of automobile and motorcycle tires quickly. 3. This product can help at the emergency when one has a flat tire suddenly on the high way, on the way to work or in the wilderness. 4. Take one with you! It doesn’t take up much space if you put it in your boot. You will find it useful in various ways.
5. It can inflate the rubber balls and balloon as well.6. With the pressure indicator, it can measure the tire pressure accurately.7. It has a solid and durable shell.8. With a colorful packing, it is small and portable.
9. Insert directly the valve of rubber pipe into the valve of the tire. The sound of air leakage indicates that air is being discharged. Turn the wrench of the valve by 90 degrees inwards and then the air will no longer leak out.
10. Pull out the plug and connect the pump with the cigarette lighter.
11. Turn on the motor and start inflating.12. When inflating, the indicator in dashboard will go up with pressure. Keep the pump on until the indicator point to the mark of appropriate tire pressure (the tire pressure for smaller vehicles is normally from 28PSI to 35PSI.), and then take out the plug and the valve.
